Interior designers working on airports, shopping malls and hotel lobbies are moving away from mineral fibre ceiling tiles toward anodized aluminum expanded metal ceiling mesh. The mesh delivers a defined metallic plane, hides the services above while still allowing access and air movement, and satisfies fire and acoustic requirements when backed with a mineral wool pad. Anping Velp Wire Mesh Products Co.,Ltd has supplied ceiling mesh for a dozen such interiors in the past two years, in aluminum 1060, 3003 and 5052.
The anodized finish differs from paint in one important way: it is an integral oxide layer grown from the metal itself, so it cannot chip, peel or blister. In a busy concourse where ceilings are cleaned with brushes and where humidity swings are large, that durability has real value over the twenty-year design life of the space.
| Attribute | Value |
|---|---|
| Material | Aluminum 1060, 3003, 5052 |
| Plate thickness | 0.8mm, 1.0mm, 1.5mm, 2.0mm |
| Aperture | 5 x 10mm, 10 x 20mm, 15 x 30mm, 20 x 40mm |
| Hole shape | Diamond, hexagonal, fish scale, custom |
| Panel size | 600 x 600mm, 600 x 1200mm, 1 x 3m |
| Finish | Anodized, powder coated, PVDF |
| Mounting | Lay-in T-grid, hook-on, tension wire |
Ceiling mesh is a two-sided product: it is seen from below and it also shades and diffuses light from the fittings above. Open area between 40 and 65 percent gives a good balance, hiding ductwork while letting enough light through to avoid a dark soffit. Where the mesh is used as a light reflector in a backlit ceiling, the factory can supply a brighter anodized finish with a controlled gloss level.
The factory supplies ceiling mesh with an installation layout drawing that shows panel numbering, hanger points and border trims. For projects with complex geometry, curved or trapezoidal panels are produced to a template, and a 1:1 sample panel is issued before the main run so that the lighting designer can confirm the light spill and shadow line on site.
Interior contractors can order ceiling mesh, wall cladding mesh and perforated acoustic panels in a single shipment, with all finishes matched from the same anodizing or coating batch. This reduces the risk of a color mismatch between ceiling and elevation that is otherwise only discovered during installation.
![]()
![]()
![]()
![]()
![]()
![]()
WA/Tel: 86-156-14839157
Email:sale2@velpwiremesh.com
Web: www.perforatedmetal-mesh.com
Contact Person: Ms. Suzen
Tel: 15131889404